Air X Marine Wind Turbine – Wind is the future of tomorrow!

Review By: Michael Merritt

Product Star Rating:style1_5.jpg


Air-X Marine – Wind is the future of tomorrow!
The world’s number one selling marine wind turbine is by far  the Air-X Marine. It is a small wind turbine designed for sailboats and other boats. This was designed with the weather elements in mind for this marine grade wind turbine for boats has marine powder coating and stainless steel fittings for corrosion protection in a marine environment. The Air-X Marine is easy to install and all that is need for mounting is a 1.5” schedule 40 pipe (1.9” OD, 48 mm) which is not included.
Click Here for our Authorized AIR-X Marine Dealer
The Air-X Marine has start-up wind speed of only 6 Knots (7 mph, 2.7 m/s) and at wind speeds of 28 mph the Air-X Marine produces 400 Watts of power, the powering possibilities are endless. With blue water cruisers selling over 70,000 turbines worldwide in just a few short years, the AIR X Marine has become the standard wind turbine. Supplying power from the AIR-X Marine is capable of supplying power for: the refrigerator, auto-pilot, your water maker, lights, navigational equipment, and yore communication equipment. The AIR-X Marine features a patented peak power tracking for maximum power no matter how high the wind speeds. Other users have operated all of the equipment aboard their 40 ft (12 m) sailboat including (with an inverter) a microwave, coffee pot, bread maker, TV and VCR, toaster as well as 12 volt system radio, radar, lights, loran and refrigerator. The AIR-X Marine was their only source of recharging aside from occasional engine motoring.
Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds, causing loud flutter noise in winds above 35 mph (16 m/s).The Air-X Marines blades are made of carbon fiber composite plus there is a new microprocessor-based speed control which results in increased performance, improved battery charging capability and the reduction of “flutter” noise commonly found with most small wind turbines. The turbine’s smart controller allows it to actually control blade rotation speed eliminating the buzzing noise .The controller allows for peak-power tracking of the wind by optimizing the alternator’s output on all points of the cubic curve and then efficiently delivers the energy to the battery.  Furthermore, the new series of carbon-reinforced blades with a modified pitch angle further increases power production. The new electronics are a considerable improvement over the AIR 403 controller that consists of diode-rectification and a simple on/off voltage switch.
The engineers seemed to have also developed a much lower stress design. The new AIR-X limits power on the input side of the electronics by controlling the torque from the blades. The power no longer has to be dissipated by the electronics resulting in lower stress on the circuit, bearings and other materials. Furthermore, stress on wind turbines occurs primarily in high winds. Under these conditions, the electronic stall design reduces the blade speed to 600 rpm, thereby significantly reducing turbine and tower loading while still producing power. The benefit is the greater confidence in turbine operation in high wind conditions without having to manually operate the stop switch. Air-X Marine seems to have improved resistance to the effects of the sun, wind and water by vastly improving body preparation and the applications of the marine paint during manufacturing ensuring a more durable powder-coat protection to the body and internal components. Even when subjected to the most extreme sun, wind and water conditions the Air-X Marine seems to
The Air-X Marine also has improved battery charging where previous AIR designs required 300-400 amp-hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging and reads the battery voltage then compares it to the voltage setting to see if the battery is charged then it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. What this ultimately means is any size battery bank from 25 to 25,000 amp-hours or higher can be charged safely. When the battery has reached it’s fully charged state, the AIR-X will come to almost a complete stop. Only when the battery has dropped below its voltage set point will it startup again and resume charging. This creates a hugh benefit by extending the battery life and not overcharging it.
Specifications for this product:
Voltage:12, 24 and 48 VDC available (select from above drop down menu)
Rated Power: 400 watts at 24 Knots (28 mph, 12.5 m/s)
Turbine Controller: Microprocessor-based smart internal regulator with peak power tracking
Body: Cast aluminum (AirX Marine is powder coated for corrosion protection). Improved powder coating protection, as the body is acid etched and treated with alodine before powder coating with a UV resistant marine paint.
Blades: (3) Carbon Fiber Composite Blades
Assembly includes: Assembly includes “Tef-gel” compound to resist corrosive activity between dissimilar metals like stainless steel and aluminum.
Overspeed Protection: Electronic torque control
Kilowatt Hours: 38 kWh/mo @12 mph (5.4 m/s)
Survival Wind Speed: 110 mph (49.2 m/s)
The AIR-X Marine carries a 3 year warranty and is produced by Southwest Windpower. The AIR series wind turbine was introduced to the public in 1994 and now approximately 18,000 Air Marine, Air Wind Module, and Air Industrial wind turbines are produced and shipped to over 100 countries, making it the best selling battery charging wind turbine in history. Click the link below to go to an Authorized AIR-X Marine dealer.
Click Here for our Authorized AIR-X Marine Dealer

yhst-99239380869547_2111_65338249.gifThe world’s number one selling marine wind turbine is by far the Air-X Marine.  It is a small wind turbine designed for sailboats and other watercraft.  This was designed with the weather elements in mind for this marine-grade wind turbine for boats has a marine powder coating and stainless steel fittings for corrosion protection in a marine environment.  The Air-X Marine is easy to install and all that is need for mounting is a 1.5” schedule 40 pipe (1.9” OD, 48 mm), which is not included.

The Air-X Marine has a start-up wind speed of only 6 Knots (7 mph, 2.7 m/s).  At wind speeds of 28 mph with the Air-X Marine producing 400 Watts of power the powering possibilities are endless.  With blue water cruisers selling over 70,000 turbines worldwide in just a few short years, the AIR X Marine has become the standard wind turbine.  The AIR-X Marine is capable of supplying power for the refrigerator, auto-pilot, your water maker, lights, navigational equipment, and your communication equipment.

Click Here for our Authorized AIR-X Marine Dealer

The AIR-X Marine features patented peak power tracking for maximum power no matter how high the wind speeds.  Other users have operated all of the equipment aboard their 40 ft (12 m) sailboat including (with an inverter) a microwave, coffee pot, bread maker, TV, VCR, and toaster as well as 12 volt system radio, radar, lights, loran, and refrigerator.  The AIR-X Marine was their only source of recharging aside from occasional engine motoring.

Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds, causing loud flutter noise in winds above 35 mph (16 m/s).  The Air-X Marines blades are made of carbon fiber composite plus there is a new microprocessor-based speed control which results in increased performance, improved battery charging capability, and the reduction of “flutter” noise commonly found with most small wind turbines.

The turbine’s smart controller allows it to actually control blade rotation speed eliminating the buzzing noise.  The controller allows for peak-power tracking of the wind by optimizing the alternator’s output on all points of the cubic curve and then efficiently delivers the energy to the battery.  Furthermore, the new series of carbon-reinforced blades with a modified pitch angle further increases power production.  The new electronics are a considerable improvement over the AIR 403 controller that consists of diode-rectification and a simple on/off voltage switch.

Click Here for our Authorized AIR-X Marine Dealer

The engineers seemed to have also developed a much lower stress design.  The new AIR-X limits power on the input side of the electronics by controlling the torque from the blades.  The power no longer has to be dissipated by the electronics resulting in lower stress on the circuit, bearings, and other materials.  Furthermore, stress on wind turbines occurs primarily in high winds.  Under these conditions, the electronic stall design reduces the blade speed to 600 rpm, thereby significantly reducing turbine and tower loading while still producing power.  The benefit is the greater confidence in turbine operation in high wind conditions without having to manually operate the stop switch.

Air-X Marine seems to have improved resistance to the effects of the sun, wind, and water by vastly improving body preparation and the applications of the marine paint during manufacturing ensuring a more durable powder-coat protection to the body and internal components.  Even when subjected to the most extreme sun, wind, and water conditions the Air-X Marine seems to outperform the rest.

The Air-X Marine also has improved battery charging where previous AIR designs required 300-400 amp-hour battery banks so the trickle charge of the wind turbine could be adequately absorbed.  The AIR-X’s charge controller periodically stops charging and reads the battery voltage then compares it to the voltage setting to see if the battery is charged then it completely shuts off all current going to the battery.  This function is performed within a few milliseconds.  The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action.  What this ultimately means is any size battery bank from 25 to 25,000 amp-hours or higher can be charged safely.  When the battery has reached its fully charged state, the AIR-X will come to almost a complete stop.  Only when the battery has dropped below its voltage set point will it startup again and resume charging.  This creates a huge benefit by extending the battery life and not overcharging it.

Specifications for this product:

Tracking Body: Cast aluminum (AirX Marine is powder coated for corrosion protection)Improved powder coating protection, as the body is acid etched and treated with alodine before powder coating with a UV resistant marine paint.

  • Voltage:  12, 24 and 48 VDC available
  • Rated Power:  400 watts at 24 Knots (28 mph, 12.5 m/s)
  • Turbine Controller:  Microprocessor-based smart internal regulator with peak power
  • Tracking Body: Cast aluminum (AirX Marine is powder coated for corrosion protection)Improved powder coating protection, as the body is acid etched and treated with alodine before powder coating with a UV resistant marine paint
  • Blades:  Three Carbon Fiber Composite Blades
  • Assembly includes: “Tef-gel” compound to resist corrosive activity between dissimilar metals like stainless steel and aluminum
  • Over speed Protection: Electronic torque control
  • Kilowatt Hours: 38 kWh/mo @12 mph (5.4 m/s)
  • Survival Wind Speed: 110 mph (49.2 m/s)

The AIR-X Marine carries a 3 year warranty and is produced by Southwest Windpower.  The AIR series wind turbine was introduced to the public in 1994 and now approximately 18,000 Air Marine, Air Wind Module, and Air Industrial wind turbines are produced and shipped to over 100 countries, making it the best selling battery charging wind turbine in history.  Click the link below to go to an Authorized AIR-X Marine dealer.

Green Dealer

© MyDIYGreenEnergy.com

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • LinkedIn
  • Live
  • MSN Reporter
  • MySpace
  • Add to favorites
  • Diggita
  • DotNetKicks
  • DZone
  • email
  • Linkter
  • Netvibes
  • Ping.fm
  • Propeller
  • Reddit
  • Slashdot
  • Webnews.de
  • Wikio
  • Yahoo! Bookmarks
  • Yahoo! Buzz

Whisper 500 – Serious Energy for Your Remote Power Needs

Review By: Michael Merritt

Product Star Rating:style1_5.jpg

Whispe500 – Serious Energy for Your Remote Power Needs
The robust Whisper 500 by Southwest Windpower delivers maximum output in any wind. It produces some serious energy for your remote power needs. With it’s patented side furling over-speed protection optimizing output at any wind speed. The Whisper 500 has proven to perform well in harsh, strong wind environments with its two-bladed, fiberglass-reinforced design. For instance, let’s assume there is 12 mph (5.4 m/s) wind; the Whisper 500 will produce as much as 500 kWh per month. That is more than enough energy to power about half the needs of an average California home.
Click Here for a Whisper 500 Authorized Dealer
With its exclusively designed side-furling angle-governor protects the turbine in intense winds by rotating the alternator & blades away from the wind, reducing turbine exposure. This angle-governor lets the Whisper 500 continue to safely spin and produce lots of energy even in high winds.
The Whisper 500 features a controller and optional digital display. The unit ships complete with a controller and diversion load, ensuring quiet, safe operation of your wind turbine when the batteries are charged. The controller installs easily in minutes and it helps protect both your wind turbine and battery.  The controller easily fits inside your battery room.
The optional LCD display is perfect to instantly monitor real-time data on the performance of your Whisper 500. The display can be easily mounted on the controller or up to 1000 feet (300 meters) away, so you can monitor performance in the comfort of your home. You can even add an anemometer feed to compare wind speed with turbine output to make sure you are getting the most from your Whisper 500.
The Whisper 500 features:
* Kilowatt Hours/Month: 538 kWh/mo at 12 mph (5.4 m/s)
* Rotor Diameter:15 Feet (4.5 m)
* Voltage: 24, 36, 48 VDC (high voltage avail.)
* Rated Power: 3000 Watts at 24 mph (10.5 m/s)
* Turbine Controller: Whisper Charge Controller (included)
* Warranty: 5 Year Limited Warranty
Installing the Whisper 500 requires no welding or machining. All you need to obtain is pipe material and power wires. Authorized dealers offer tower kits that include all the cables and fasteners you will need. The anchors are sold separately. Installation of the towers does require a concrete foundation and at times a crane may be needed to lift the wind turbine into place.
A Whisper system from South West Power combines well with photovoltaic solar panels to balance out fluctuating solar and wind resources. Generally, winter months provide more wind and less sunlight, while summer months provide more sunlight but less wind. A hybrid system using a Whisper wind generator provides year-round energy production. Southwest Windpower was recently honored by U.S. Commerce Secretary on November 6 as recipients of the prestigious 2009 Presidential “E” and “E Star” Awards at the National District Export Council Conference. The “E” Award is the highest U.S. Government recognition any U.S. entity may receive for supporting export activity. Southwest Windpower is the world’s leading manufacturer of small wind turbines
Real
Click Here for a Preferred Whisper 500 Authorized Dealer

Whisper.gif

The robust Whisper 500 by Southwest Windpower delivers maximum output in any wind. It produces some serious energy for your remote power needs with its patented side-furling over-speed protection optimizing output at any wind speed. The Whisper 500 has proven to perform well in harsh, strong wind environments with its two-bladed, fiberglass-reinforced design. For instance, let’s assume there is 12 mph (5.4 m/s) wind; the Whisper 500 will produce as much as 500 kWh per month. That is more than enough energy to power about half the needs of an average California home!

Its exclusively designed side-furling angle-governor protects the turbine in intense winds by rotating the alternator and blades away from the wind, reducing turbine exposure. This angle-governor lets the Whisper 500 continue to safely spin and produce lots of energy even in high winds.

Click Here for a Whisper 500 Authorized Dealer

Controller6.jpgThe Whisper 500 features a controller and optional digital display. The unit ships complete with a controller and diversion load, ensuring quiet, safe operation of your wind turbine when the batteries are charged. The controller installs easily in minutes and it helps protect both your wind turbine and battery. The controller easily fits inside your battery room.

The optional LCD display is perfect to instantly monitor real-time data on the performance of your Whisper 500. The display can be easily mounted on the controller or up to 1000 feet (300 meters) away, so you can monitor performance in the comfort of your home. You can even add an anemometer feed to compare wind speed with turbine output to make sure you are getting the most from your Whisper 500.

The Whisper 500 features:

  • products_W500_energy.gifKilowatt Hours/Month: 538 kWh/mo at 12 mph (5.4 m/s)
  • Rotor Diameter: 15 Feet (4.5m)
  • Voltage: 24, 36, 48 VDC (high voltage avail.)
  • Rated Power: 3000 Watts at 24 mph (10.5 m/s)
  • Turbine Controller: Whisper Charge Controller (included)
  • Warranty:  5 Year Limited Warranty

Installing the Whisper 500 requires no welding or machining. All you need to obtain is pipe material and power wires. Authorized dealers offer tower kits that include all the cables and fasteners you will need. The anchors are sold separately. Installation of the towers does require a concrete foundation and at times a crane may be needed to lift the wind turbine into place.

about_typical_system.png

A Whisper system from South West Power combines well with photovoltaic solar panels to balance out fluctuating solar and wind resources. Generally, winter months provide more wind and less sunlight, while summer months provide more sunlight but less wind. A hybrid system using a Whisper wind generator provides year-round energy production. Southwest Windpower was recently honored by the U.S. Commerce Secretary on November 6 as recipients of the prestigious 2009 Presidential “E” and “E Star” Awards at the National District Export Council Conference. The “E” Award is the highest U.S. Government recognition any U.S. entity may receive for supporting export activity. Southwest Windpower is the world’s leading manufacturer of small wind turbines.

Green Dealer

© MyDIYGreenEnergy.com

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • LinkedIn
  • Live
  • MSN Reporter
  • MySpace
  • Add to favorites
  • Diggita
  • DotNetKicks
  • DZone
  • email
  • Linkter
  • Netvibes
  • Ping.fm
  • Propeller
  • Reddit
  • Slashdot
  • Webnews.de
  • Wikio
  • Yahoo! Bookmarks
  • Yahoo! Buzz